home *** CD-ROM | disk | FTP | other *** search
- BC205XLT.1
-
- UNIDEN/BEARCAT 200/205XLT TEST MODE
-
- by Bob Parnass, AJ9S
-
- According to the Uniden/Bearcat 200/205XLT Service Information Manual, the
- following procedure will load channels 1-25 with various test frequencies, and
- zero the remaining 175 channels:
-
- 1. Press and hold three keys: 2, 9, and MAN simul-taneously and turn
- the power switch on.
-
- 2. Set the power switch to the off position.
-
- 3. Repress and again hold three keys: 2, 9, and SCAN simultaneously and
- turn the power switch on.
-
- BC200/205XLT CELLULAR RESTORATION
-
- Note: It is unlawful to monitor cellular telephone conversations. It is
- possible to monitor signals from the deleted ranges even without conversion.
- Simply add 21.7 MHz to the deleted frequency and enter the higher (image)
- frequency. Reception is virtually identical in strength to that which would be
- heard on the deleted frequency.
-
- The frequencies deleted at the factory may be restored, but the
- procedure must not be attempted by anyone unfamiliar with electronic
- circuitry. Grove Enterprises assumes no liability for damage caused by
- this procedure. (I won't eighter! WA2ISE). The modification will void
- your warranty.
- CONTINUED IN FILE BC205XLT.4